Tag Archives: Philly Dyno

LS2 SUBARU

LS2 Turbo Swapped Subaru STi Build

Jesse from JT Coating had us do a big turbo build on his Subaru STi in the past and it made just over 600whp on E-85. It looked great at the shows, and performed well on the street, but Jesse wanted to build something different for next seasons events. Screen Shot 2017-10-05 at 2.08.07 PMScreen Shot 2017-10-05 at 2.08.22 PM

After discussing some options, some type of Chevy LS build was chosen based on cost, performance and overall uniqueness. We began hunting for parts, while Jesse sold off the Subaru parts we would no longer be using.

Screen Shot 2017-10-05 at 5.42.28 PM

An LS2 6.0L engine and transmission was sourced and the project began. Our head fabricator Don took charge on the build and started banging out the mock up phase pretty quickly. Everything went together fairly easy, it was like the V8 was meant for the car minus a few small changes. While the engine was out a BTR cam package was installed with a few other supporting mods. As many of you know the supporting mods can be the most important parts of a project.

Screen Shot 2017-10-05 at 2.07.35 PM Screen Shot 2017-10-05 at 5.42.44 PM

Once we had the general setup of the engine and headers laid out, the turbo kit began being fabricated. A cast wheel Borg Warner S475 was the turbo of choice, with complimentary Turbosmart & Vibrant pieces to bring it all together.

 

 

 

 

The excitement of seeing the turbo kit and big front mount intercooler mocked up really had us motivated to get this one running. To make all of this work, the cooling system was custom mounted in the trunk with some Radium Engineering bits and good old fashioned ingenuity.

Screen Shot 2017-10-05 at 2.08.31 PMIMG_4983

To go along with the AEM Infinity ECU, the new CD-7 display was custom mounted in the dash to give a clean factory appearance. This makes visibility of all engine parameters easy to monitor while driving around. Plus digital displays just look cool on any race inspired project.

IMG_4987   Now that most of the mock up was complete, we disassembled the car and gave Jesse a slew of parts for him to work his magic on. The quality blew us away when he brought them back after powder coating. We knew this would be the head turner we envisioned from the beginning now.

Screen Shot 2017-10-05 at 2.14.16 PM

With final assembly under way, we gave Karl from K.P. Tuning a call to sprinkle his LS magic on the build. He came by and went over the build to finalize a few loose ends and get the car started up. It fired up without a hitch and actually sounded pretty tame still using the aftermarket Subaru cat-back exhaust. There wasn’t a person in the shop that didn’t have a big smile on their face hearing the car running for the first time. Screen Shot 2017-10-05 at 2.14.04 PM

Now it came down to strapping it on our in house DynoJet, and backing up all the long hours of work. This car runs on regular old 93 octane pump gas, so we filled up and had K.P. get to work. On only the second pull at single digit boost levels it laid down 599whp. Without even blinking an eye it was about to eclipse what the fully built e-85 Subaru setup did.  By the end of the tuning session the final horsepower number read 794whp at only 12psi! K.P. suggested upgrading the fuel system if we wanted more power, being as it is on stock Subaru lines, in tank fuel pump, and only 1000cc injectors.

LS2 SUBARU

Check out the dyno video below, and contact us if you have any questions about starting your own custom build. We will be starting on a second LS swapped Subaru soon with its own unique twist, and we already have a 2JZ Subaru build underway that we can not wait to share with the world.

IMG_4977 IMG_4981

IMG_4992