Tag Archives: Mitsubishi

Evo X Big Turbo Kit – Part 2

 

DSC_0016 Watching a turbo kit come together is always exciting to see, no matter what car it’s on. The intense detail that goes into every piece makes it not only a car part, but a work of art as well.

DSC_0173 DSC_0188And it just looks badass once everything is bolted up, and that big turbo stairs you in the eye. This Evo is craving its appointment with the dyno. Here’s a bunch of extra photos of the turbo kit for your viewing pleasure.

DSC_0287DSC_0343DSC_0559To top everything off we bolted a massive APR Performance carbon fiber wing to the trunk.  Big wings don’t work every time, but it definitely worked this time.

DSC_0629DSC_0582DSC_0621Now lets get this big turbo Evo strapped down for a dyno tune! Check back for for some power figures.

DSC_0618

Check out Part 1

-Ryan

Evo X Big Turbo Kit – Part 1

DSC_0876Evo’s are one of our specialties, and when it comes to custom turbo kits, we’re the best in the business. This Evo X is going to get a PSI Proformance custom turbo kit, minus the intercooler which was supplied by the owner. That means exhaust manifold, intercooler piping, downpipe, etc is all going to be custom fabricated by us.

DSC_0580DSC_0891To help with power even more, we cracked open the head for some upgrades. It was treated to upgraded cams with valve springs and retainers to go along with them.

DSC_0989The exhaust manifold is getting mocked up in our jig to make sure everything fits flawlessly. Check back for more updates on this turbo build!

-Ryan

 

Another 400whp Eclipse!!!!

Yesterday at the shop we had this Mitsubishi Eclipse come into the shop for a dyno tune. The car was looking really clean with it’s sparkling green paint and fresh wheels. After a few pulls on the dyno, we all knew this car had the potential to make some good power. With some simple mods such as a bolt-on 50 trim turbo, and Magnus Manifold it was able to make 409whp and 390tq on 24-25 pounds of boost. With some cams this car could easily make 450-500 horsepower.

Zoom Zoom!

Today we had one Mazda MS3 in for a tune that lived up to Mazda’s slogan of  “Zoom Zoom”.  From the start you could tell this car meant business with its growl from Cobb bolt-ons including an intake and exhaust.  This MS3 was also sporting a front mount intercooler and a TB30r Turbo, but besides that the car was mainly stock.  Even with it’s mainly stock motor, this Mazda was able to put down 374whp and 347tq, which is quite impressive.  We look forward to even more power and updates from this car in the future.










Boost, Boost, and more Boost!!!!!

Today at PSI PROFORMANCE we had this Dodge SRT-4 in for a dyno tune. This car was fairly stock except for an AEM intake. After the tune, the car was able to put down 296 whp and 329 tq on 18 pounds of boost on a stock turbo. Just imagine how much power it would make if it had a bigger turbo!

[youtube http://www.youtube.com/watch?v=VlyZeP-YuXk&w=420&h=345]

Freedom Moves!!!!

Over this past weekend was Freedom Moves presented by Club Loose, which is an all around weekend of awesomeness.  There’s partying, drifting, and hanging out with old friends.  A couple of our customers were tearing it up, including Josh and Jim in their 240’s.  Here are some pictures of them in action at Englishtown Raceway Park.  We are looking forward to the next event, which is Finishing Moves on October 1st.







Fuel Rails in Stock and on Special!!!!!!

Psi Proformance is proud to announce that we have in stock Aeromotive and Agency Power Fuel Rails for your Subaru Wrx and Sti.  Call today for more details!

VTEC and Boost = Fun!!!!!!!

Yesterday at PSI PROformance, we had this Honda Civic come into the shop for a dyno tune.  This car was equipped with an LS/VTEC and turbo setup, which usually means good power.  The turbo setup was pushing out 15 lbs of boost which resulted in 410 wheel horsepower and 281 foot pounds of torque.  A lightweight civic with over 400 horsepower is quite fast and should run some good times in the quarter mile.