Procharged Coyote Build

We’ve done Mustangs with Prochargers before, but this one is a little different. The owner brought us the car with the Procharger already installed and wanted to do a little twist on it. He wanted an smaller diameter pulley for more boost, but a wastegate on the intercooler piping to regulate boost pressure. With this kind of setup he will be able to run different amounts of boost up to the max psi that the pulley produces.

dsc_0233dsc_0239dsc_0228Placement of the red Tial blow off valve and wastegate was definitely important. From the outside others had to know that this Mustang was something special. We decided to mount them on each side of the intercooler so that they’d show in the lower part of the front bumper. Their red color definitely makes their presence known.

dsc_0558

dsc_0555The small diameter pulley will be producing around 20 lbs of boost, but the wastegate will be able to regulate it.

dsc_0576While we were under the hood, we upgraded the crank sprocket and oil pump gear as preventative maintenance, since they are known to fail.

Stay tuned for more updates!

 

Current modification list:

Corsa Sport Cat-back

Cat Delete

VMP Boost-a-pump

ID1000 Injectors

MGW shifter

MMR Crank & Oil Pump Gears

Tial Q BOV

Tial 44mm Wastegate

3.85″ Procharger Pulley

Custom Intercooler Piping

Leave a Reply